ENGLISH
CHANGING THE DOOR-OPENING DIRECTION:
TOOLS REQUIRED:
➭
A Phillips screwdriver.
5
BEFORE SWITCHING THE REFRIGERATOR ON:
➭
Clean the inside with warm water and baking soda. Rinse and dry carefully.
➭
Wait for 2 hours before starting to ensure that the motor lubricants have
stabilized.
➭
If the refrigerator has been switched off, wait 4 hours after restarting before
placing food inside.
PROCEDURE:
1. Unplug the refrigerator and take everything from the
compartment.
2. Remove the cover from the top hinge. (Fig.1)
3. Loosen the top hinge screws. (Fig.1)
4. Take the door off with an upward movement.
5. Remove the cover of the central hinge screws, and
loosen the two screws holding it in place. (Fig.2)
6. With the screws loose, move the freezer door upward to
release it.
7. Lastly, remove the screws and take out the bottom hinge.
(Fig.3)
8. Change the position of the
bottom hinge shaft, placing it on the opposite side.
(Fig.3)
9. If fitted, change the lateral handles to the
other side.
10. Reverse this procedure to refit the doors.
Fig. 2 Central hinge
Fig. 3 Bottom hinge
Fig. 1 Top hinge
ELECTRICAL CONNECTION:
➭
Plug specifications: grounded 110-120V.
➭
Do not use adaptors or extension cables.
➭
Ensure that the cable is not in contact with the motor.
➭
Ensure that the cable is not caught under the refrigerator.
