8
3. SAFETY
The hairdryer is equipped with a an overload
protection system which switches off the
appliance if overheating occurs (e.g. if the air
inlet or outlet are blocked). If the hairdryer
switches off during use, turn the switch to "0"
and wait for 5 minutes approx. Remove the
cause of the obstruction and switch it on again.
4. USING THE HAIRDRYER
• After washing your hair, towel-dry and
comb it.
• Do not use any aerosols or flammable
chemical products on your hair.
• Plug in the appliance and turn the switch
to the desired temperature and air flow.
Mod. SP-1800
Cold air button: The cold air button is for
reducing the air temperature during
functioning, to allow rapid cooling regardless
of the switch position.
I/0 switch and air flow selector
This is for starting up and stopping the
appliance and also for selecting the most
suitable air flow.
0 = Off
1 = Gentle air flow
2 = Strong air flow
Temperature selector
The temperature selector is for selecting the
power and therefore the working temperature.
1 = Low temperature
2 = Medium temperature
3 = High temperature
Mod. SP-121 A
I/0 Switch
This switch is for starting up and stopping the
appliance and for selecting the air flow and
temperature.
O O = Off
1 1 = Medium temperature, low air flow.
2 2 = High temperature, high air flow.
5. CLEANING
• Unplug the appliance before cleaning it.
• NEVER SUBMERGE THE APPLIANCE
IN WATER OR ALLOW MOISTURE TO
ENTER IT.
• Clean the air inlet grille regularly with a
brush, to remove any dust and hair which
may have become trapped in the grille.
Rotate the air inlet grille anticlockwise to
remove it. All components must be
completely dry before they are fitted back
on to the hairdryer.
• Clean the outside of the appliance with a
slightly damp cloth and dry it with a dry
cloth.
• Remove the accessories before cleaning
them.
6. WASTE ELIMINATION
The materials used in the
packaging, product and
accessories can be recycled.
Correct separation of waste
materials will allow recyclable materials to be
re-used.
When the appliance is no longer useful, you
should cut its cord to put it out of action and
dispose of it using a suitable waste elimination
procedure. For further information on this
matter, consult your local authorities.
Selecting voltage: This model may be used
with a voltage supply of either 120V~ or
230V~. Before using the appliance, check the
voltage selected is the same as that of your
mains supply. Otherwise, the appliance could
be irreparably damaged.
interior 19/5/04 19:17 Página 7
