Fagron FagronLab RVC1, User Manual

FagronLab™ RVC1

FagronLab™ RVC1 – User Manual  |  12

Standby

Sleeping

Scheduling 

•

  Standby means the robot’s main power is “ON”, and the robot is ready to use. It can be changed to standby mode by 

below methods:

1.  During robot cleaning, press "CLEAN" on main body to enter standby mode.
2.  During robot cleaning, press ON/OFF button on remote control to power off the robot.

•

  In sleeping mode, the robot can only be waken up from "CLEAN" button on main body or ON/OFF on remote control in 

order to save power. To turn robot into sleeping mode from standby mode:

1.  Keep pressing "CLEAN" on main body for 3 seconds.
2.  Robot will automatically enter sleeping mode if there is no command received for more than 60 seconds.

You can schedule the robot to make it start cleaning automatically at a certain time every day.

Scheduling by keys on the main body

Schedule by the LED panel on robot 

Setting Robot Clock

•

  In standby or charging status, press "PLAN" to start the clock-setting. The LED panel will show the current system time.

•

  Press "CLEAN" to enter the hour-setting mode, the left two numbers on LED panel will flash. Press "HOME" to increase hour 

or "SPOT" to decrease it.

•

  Press "CLEAN" again to enter the minute-setting mode, the right two numbers on LED panel will flash. Press "HOME" to 

increase it or "SPOT" to decrease it.

•

  Press "CLEAN" again to confirm the setting. 

Setting the scheduling time

•

  In standby or charging status, press "PLAN" for two times to start scheduling, LED panel will show previous scheduled time 

or “00:00” if there is no schedule settled before. 

•

  Press "CLEAN" to enter hour-setting mode, the left two numbers on LED panel will flash. Press "HOME" to increase hour or 

"SPOT" to decrease it.

•

  Press "CLEAN" again to enter the minute-setting mode and the right two numbers on LED panel will flash. Press "HOME" to 

increase minute or "SPOT" to decrease it.

•

  Press "CLEAN" again to confirm the scheduling.

Cancel the scheduling

•

  Set the scheduling interval to 00:00.

Note:

• 

The robot can only be set when it’s in Standby or Charging mode. If the robot is in sleep mode, press 
"CLEAN" on main body or ON/OFF button on remote control to wake up the robot. If the robot is in 
Cleaning mode, stop it before scheduling.

Note:

• 

Before scheduling, please set the robot time to be the same with real time.

• 

The robot will start cleaning at the schedule time of Robot Clock every day.