GRILLA PELLET SMOKER GRILL
OPERATION MANUAL
8
Shutdown Sequence
When power button is pressed for 2 seconds:
ErL (low temp) Code
ErH (high temp) Code
FHi (food high) Code
Additional Information
• Auger turns off.
• Fan continues to run for 5 minutes.
• Board displays C5, C4, C3, C2, C1 (minutes) then
goes blank.
• Grill temp was below 150°F for more than 10 minutes.
• Grill temp reached 615°F.
• Food probe is above 225°F. Removing probe from socket returns board to normal read out.
Ignition Sequence
When power button is pressed:
• Igniter turns on and runs for 4 minutes. At 4
minutes if temp is above 150°F, it turns off. If
temp is below 150°F after 4 minutes, it stays on
for 4 more minutes (8 total) then turns off.
• Auger turns on at 100% during the ignition stage
then goes to normal temperature
control operation.
• Fan turns continuously.
• Board displays current temperature. If below
110°F (likely), the display will be flashing until
above 110°F. It has 10 minutes (ERL requirement)
to get above this or it initiates ERL code.
Follow these operating instructions exactly as stated to ensure safe and reliable operation. Carefully read this manual.
warning
:
Do not attempt to move Chimp while running.
