background image

2

11-24 VDC

Less than 4 watts

Current mode input range 0-24 mA

35 mA maximum without damage

Voltage mode input range 0-12 VDC

Voltage mode input clamped at 13 VDC

150 psig

No less than 5 psig

above maximum output

11 SCFM @ 150 psig

supply at midscale output

2.0 SCFM @

15 psig output pressure

Instrument Air per ISA

S7.0.01 Recommended

Range 0 –160ºF

+(0.5%+0.06%/ºF)

of span

The Model T79xx Series includes Model T7900 and
Model T7950 Electro-Pneumatic I/P, E/P transduc-
ers Control Output Pressure in proportion to an
analog input signal.

When you apply initial power to the units,  

 dis-

plays on the Main Menu.  If the keypad is inactive for
three minutes, the unit returns to 

.  If power is

disrupted, the unit returns to its last setting when
power is restored.

These devices use feed and bleed solenoid valve
control technology, digital feedback electronic con-
trol, and an internal electronic pressure sensor to
achieve high accuracy pressure control.  Flexible
configuration and PID tuning capability ensure that
these pressure controllers can meet the most de-
manding air pressure control applications.

SPECIFICATIONS

Model T7900

Model T7950

Electrical

Supply voltage  . . . . . . . . . . . . . . . . . . . . . .  11-24 VDC
Power consumption. . . . . . . . . . . . .  Less than 4 watts
Analog input . . . . .  Current mode input range 0-24 mA
                                  35 mA maximum without damage

                 Voltage mode input range 0-12 VDC

                        Voltage mode input clamped at 13 VDC

Pneumatic

Maximum Supply pressure:

  

. . . . . . . . . . . . 200 psig

Minimum Supply Pressure. .  . . . No less than 5 psig
                                                   above maximum output

Forward Flow Capacity

. . . . . . . . . .   Up to 100
      SCFM @  170 psig

Exhaust Flow Capacity . . . . . . . . . . . .  Up to 50 SCFM

Air Quality . . . . . . . . . . . . . . . . . . . . . .      Instrument Air

           per ISA S7.0.01 Recommended

Input signal / Impedance

:  . . .  4-20 mA / 246 ohms,

                                                   0-10 VDC / 500k ohms

GENERAL INFORMATION

Electrical

Supply voltage . . . . . . . . . . . . . . . . . . . . . . .
Power consumption . . . . . . . . . . . . . . .
Analog input . . . . .

Pneumatic

Maximum Supply Pressure .  . . . . . . . . . . . . .    .
Minimum Supply Pressure . . . . . . .

Forward Flow Capacity . . . . . . . .

Exhaust Flow Capacity . . . . . . . . . . . . . .

Air Quality . . . . . . . . . . . . . . . . . .

Environmental - T7900 AND T7950

Operating Temperature . . . . . . . . . . . .
Temperature Effect . . . . . . . . . . . .

Summary of Contents for T79 Series









Reviews: