Fairland IDHR60, Installation & User Manual

15 

FOR INSTALLERS AND PROFESSIONALS 

1.3 Trail after Installation 

  Please check all the wirings carefully before turning on the dehumidifier. 

1.3.1. Inspection before use 

1.

Check  if  the  dehumidifier  is  vertically  or  horizontally  placed  on  the  ground  or  hung  on  the  wall, 

connected with drain pipe; 

2.

Check the electric wiring according to the electrical wiring diagram and earthing connection; 

3.

Make sure that the main power is well connected; 

4.

Make sure that setting the appropriate humidity; 

5.

Check if there is any obstacle in front of the air inlet and outlet of the dehumidifier. 

 
1.3.2. Trail 

The user should open the power switch firstly then connect the power. 

To protect the dehumidifier, it is equipped with start delay function; When starting the dehumidifier, the 

fan will firstly start to run in 3 minutes, then the compressor will start running. 

After dehumidifier starts up, check for any abnormal noise from the dehumidifier.

1.4.Daily Maintenance Notice 

The maintenance should be carried out per year by qualified professional technician.

Cut off power supply of the dehumidifier before inspection; 

Please cut off the power supply when not be used, and cover the plastic sheet use the cloth to prevent 

dust from entering. 

Please  clean  the  dehumidifier  with  the  household  detergents  or  clean  water,  NEVER  use  Volatile  oil, 

gasoline, thinner or sassafras powder.