User Manual
H
OW
T
O
… February
16,
2010
Xynergi Media Production Centre
Page 59
Click
Name
if you want to name the Speaker set
Press the
end
soft key to leave the
Config Monitors
screen.
Choose Monitor Speaker Outputs
Overview
The system allows you to define many speaker sets. There is always a MAIN set, usually your
large Control Room monitors. You may also create many other sets and choose them whenever
you like.
This guide will show you how to choose outputs for any of your speaker sets.
Get Ready
Press the green
Mon
button.
Press the
Mon
Setup
button if it’s not already lit.
Set Outputs
Press the
Config
Monitors
soft key and work on the
Mixer Screen
Choose a
Speaker
set
at the lower left.
Select all (or one) of its Elements at the top left.
Click
Analog
(or
Digital
)
Outputs
at lower right.
Choose the right number of free outputs to match the number of selected elements. Click
Patch
.
Repeat as needed.
Press the
end
soft key to leave the
Config Monitors
screen.
Change Monitor Listening Format
Overview
You can tell the system to play into a narrower format than your current speaker set. This is
called “
folding down
”.
For example, you can listen to your 5.1 mix in stereo, without changing speaker sets, by changing
the Listening format.
The system remembers the last non-standard listening format you used, and calls it the
Alternative Format
. This can be heard at any time by pressing the ALT Format button in the
Mon
Megamode
(press
mon
then
ALT
Format
)
This guide will show you how to choose a listening format.
Get Ready
Press the green
Mon
button.
Press the
Format
Setup
button.
Choose Format
Select any of the formats shown on the
soft
keys
. The system immediately switches to that
format.
