User Manual
H
OW
T
O
… February
16,
2010
Xynergi Media Production Centre
Page 89
Press the Join soft key and continue writing with the same values as when you last
stopped.
Details
Whenever the system comes out of Write mode, it remembers the values of all the parameters
that were being written.
Pressing Join causes the system to re-enter
Write
mode, and also to assert all the remembered
values. This is useful for setting a scene or section balance as follows:
Starting writing automation anywhere in a scene or section.
Adjust parameters until you are happy with the sound.
Now go back to the head of the scene and press {Join} then
Play
.
Write Recalls
Overview
Used with the Library and touch settings, to make
presets
trigger the automation.
When {Write Recalls} is toggled on, any enabled parameter that changed by loading a Library
preset behaves as though physically touched. This means that, if Touch write is on and the
parameter is enabled for the relevant signal path, it will go into Write.
This is a handy way of writing snapshots into the automation, like this:
Create a series of snapshots (presets) of the whole console, containing mixes of different
sections of the project. To save a preset, press
Mixer Megamode
Lib
Console
Save
, then give your preset a name.
Prepare to record automation by enabling all the parameters in your snapshot,
turn on
Touch AutoEnable
in the Mixer Menu, and turn on
Touch Latch
in the Mixer Megamode.
Locate to the timecode where you want to write a snapshot.
Turn on the
Write Recalls
soft key.
Press Lib
Console, click the snapshot you want at this timecode and click
Apply
. The
system will go into
Write
with your snapshot loaded. Press
Play
and then
Stop
to write
the values. Now move to the next timecode and repeat this step.
Fill Range
Overview
Fill Range
converts Previewed parameters into Written parameters across the range, as though an
instant automation pass had been performed.
In brief:
Put paths into
Preview
Change the values of
enabled parameters
Make a
range
Press the
fill
range
soft key to write the new values over the range.
