48200, 48520, and 48525 Pruners
Greenlee Textron / Subsidiary of Textron Inc.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
IMPORTANT SAFETY INFORMATION
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
SAFETY
ALERT
SYMBOL
Read and understand all of the
instructions and safety information in
this manual before operating or
servicing this tool. Refer also to the
following manuals, which are listed
under “Other Publications”:
• Operation Manual
• Specifications and Parts
Failure to observe this warning can
result in severe injury or death.
Electrical shock hazard:
• When using this tool near energized
electrical lines, use only certified
nonconductive hoses and proper
personal protective equipment.
• Keep fiberglass extension clean
and dry when working around
energized electrical lines.
Accumulated grease and dirt
reduce insulating properties of tool.
Failure to observe these warnings
can result in severe injury or death.
Skin injection hazard:
Oil under pressure easily punctures
skin, causing serious injury,
gangrene, or death. If you are injured
by escaping oil, seek medical
attention immediately.
• Do not use hands to check for
leaks.
• Do not hold hose or couplers while
the hydraulic system is pressurized.
• Depressurize the hydraulic system
before servicing.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.