Hardware
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
11
O
PTIONAL
H
AND
S
WITCHES
(MP-70
ONLY
)
Fair-Play offers the following optional hand switches for use with the MP-70/72
only.
Hand Switch
Fair-Play Part Number
Shot timer (domestic usage)
HS-70
Shot timer - for FIBA basketball rules
HS-70-FIBA
Game clock with reset
HC-70
Game clock with horn
HH-70
Time advantage clock
TA-70
When connecting a wired hand switch, refer to the drawing
on page 10. In some cases, you can connect more than one
hand switch to the MP-70/72 to at a time. The HC-70 and HH-70 hand switches
listed above include a nine-pin adaptor, allowing you to connect another hand
switch in a daisy-chain configuration.
T
O
E
NABLE OR
D
ISABLE
M
I
C
LOCK
™
R
EMOTE
S
WITCH
MiClock™ Wireless G2 Game Clock Remote model MC-10 is compatible only to
MP-72-2211 or MP-72-2213 (firmware version 2.25 or greater).
Note: Older wireless MP-70 or MP-72 models can be exchanged or upgraded at
the factory. Compatibility with MiClock requires wiring modifications and
firmware upgrades to the MP-72 (version 2.25+) and firmware upgrade to
the Wireless G2 transmitter.
1. The MP-
72, MiClock™ and the scoreboard receiver must be set to the
same RF channel.
a. For MP-72 refer to
b. For MiClock refer to
FACTORY
SETTINGS
of the
M
I
C
LOCK
Q
UICK
R
EFERENCE
Guide PN 98-2008-02.
2. Turn ON the MP-72.
3. Set the TIME IN-OUT switch to TIME OUT position.
4. Hold down the Shift key while pressing the 1 key. The bottom line of the
LCD displays “MiClock ON? Y/N”.
a. Press 4 (Y) to use only the MiClock Remote Switch and disable MP-
72 TIME IN-OUT Switch, or
b. Press 6 (N) to use only the MP-72 TIME IN-OUT switch.
5. To reset the Game Clock, refer to
