Hockey
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
47
Note: If, after entering the player penalties, you decide to cancel a player
on page 48), it is possible to
cancel the penalties you entered using the plus + keys. However, it is
NOT possible to cancel a multiple penalty that was entered using the
OTHER key. You can only cancel penalties in the queue that are to be
counted by the penalty clock.
E
NTERING TWO PENALTIES WITH PLUS KEYS
1. Press the
HOME PENALTY
or
VISITOR PENALTY
keys.
2. Press
+1
,
+2
or
+3
keys to assign a penalty time for a single
player. Each of these three keys automatically enters the amount of
penalty time(s) you specified in Program Mode’s sport-specific settings
for hockey (see
on page 41). (This
first penalty time will not display on the LCD until you enter in the player
number in Step 4).
3. Press the
+1
,
+2
or
+3
keys to assign a second penalty time for
that single player. The penalty clock will then automatically add up these
two penalty times. (Likewise, this second penalty time also will not
display on the LCD until you enter in the player number in Step 4).
4. At the ENTER PLY.NO. prompt, enter the player number on the numeric
keypad and then press
ENTER
.
5. The player number and tallied penalty time now appears on the LCD.
Example:
Player #23 receives a two-minute plus a five-minute penalty. The MP-
70/50 user presses the
+1
and
+2
keys on the control, then enters
in 23 for the player number, thus giving player
#23 a total of seven (2+5) minutes in penalties.
This tally of seven minutes is displayed on the
LCD.
If you hit the
ENTER
key before you enter in
the player number, the control will not accept
the penalty. Instead, you will see a screen
similar stating “NO PENALTY FOUND.” Re-
enter the penalty and player number using the correct sequence.
E
NTERING
O
THER PENALTIES
1. Press
HOME PENALTY
or
VISITOR PENALTY
.
HK 30 10:02.
V.# 23 7:00
HK 30 10:02.
NO PENALTY FOUND
