MP-72/52 G2 Wireless Option
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
103
S
ETTING UP THE WIRELESS
(G2)
CONNECTION
The wireless MP-72/52 control has been programmed at the factory to use the
correct scoreboard type and data format as instructed in
A
NTENNA
(G2)
For optimal transmission, rotate the MP-72/52
antenna to the full upright position when using the
controller. Placing the antenna in any other position
reduces the transmission range.
WARNING:
Never apply power to a
wireless MP-72/52 control that has its antenna
removed. This will immediately destroy the output
amplifier on the control’s transmitter card, and will
void any wireless MP-72/52 warranty. If the antenna
has been damaged, send the control to an authorized
service center for repair.
R
ANGE
(G2)
The control transmitter must
be:
1. Located within range of
the scoreboard receiver.
500 feet indoors
1,500 feet outdoors.
2. Located within a 180°
degree arc in front of the
scoreboard receiver
— to
prevent the scoreboard
from blocking the signal.
Note: The wireless signal is largely immune to conflicting radio frequency signals
from cordless telephones, cellular telephones, microwave ovens and other
radio frequency devices. For more information on interference, see