MP-73/53 G3 Wireless Option
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
125
D
ISPLAY THE
S
COREBOARD
T
YPE
(G3)
The following steps will send a command to the scoreboard to momentarily
display the
scoreboard type
.
1. Turn on the MP-73/53.
2. Press
SHIFT
+
BAT/RF
buttons and hold down for at least 6 seconds and
then release when it displays
ENTER PASS CODE
.
3. Type the following
sequence:
2
1
6
5
ENTER
.
The scoreboard will display its board type in the
seconds digit field for 3 seconds while the control
displays
Displaying- Board Type!
for 3 seconds.
R
ECEIVER CARD LOCATION
(G3)
The receiver card is located in the processor mounting area of scoreboards
equipped with the wireless option.
D
ISPLAY SCOREBOARD TRANSCEIVER SOFTWARE VERSION
(G3)
The following steps will send a command to the scoreboard to display the
software version of scoreboard’s transceiver on the scoreboard.
1. Turn on the MP-73/53.
2. Press
SHIFT
+
BAT/RF
buttons twice and
it displays
ENTER PASS CODE
.
3. Type the following
sequence:
3
8
1
9
ENTER
.
For three (3) seconds the scoreboard show its
transceiver software version in the minutes and seconds digit fields while
the controls shows
Displaying- Software Version
.
ENTER PASS CODE:
____________2165
Displaying-
Board Type!
ENTER PASS CODE:
____________3819
Displaying-
Software Version
