Introduction
8
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
I
MPORTANT
P
RECAUTIONS
Note: Power cord references throughout this manual are not applicable to
battery models unless the battery charger is connected.
Read this manual thoroughly before setting up or operating the MP-
70/50.
Do not drop the MP-70/50
Avoid exposing the MP-70/50 to liquids or moisture.
Be sure the power cord is protected from hot surfaces, sharp edges and
anything else that could damage it.
For your safety, the MP-70/50 features a three-pronged, grounded power
cord. Connect this cord only to a standard 120-volt grounded outlet. If a
120-volt grounded outlet for a three-pronged plug is unavailable, have
one installed by a qualified electrician.
Unplug the MP-70/50 when it is not in use. To unplug it, grasp the plug at
the outlet; do not pull on the cord.
The MP-70/50 contains no user-serviceable parts. To avoid personal
injury or damage to the MP-
70/50’s components, do not disassemble the
controller. Refer any repairs to a qualified technician.
When an extension cord is necessary, use only a three-pronged cord
with grounded, polarized connectors. Avoid placing the cord where
someone may trip over it or unplug it accidentally.
Do not expose the MP-70/50 to direct sunlight or extreme temperatures
for extended periods.
The MP-70/50 is not meant to operate in complete darkness. You will
need to have some ambient light to see the LCD screen.
