Team Names
82
MP-70/50
• MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
TEAM NAMES
T
EAM NAME DISPLAYS
(MP-70
ONLY
)
If your scoreboard is equipped with SpectraLens or LED technology electronic
team names displays, the MP-70 control can transmit team name data to them
through either wired or wireless transmission.
To enter the home team name, follow the steps below.
1. While pressing and holding the
SHIFT
key,
press
HOME SCORE
. The LCD will display
the prompt shown. The top line of the LCD
holds the first 16 letters of the alphabet, with a highlighting cursor
centered under the letter “I.” The bottom line prompts you to enter the
home or visitor team name.
2. Use the
4/YES
and
6/NO
keys of the numeric key pad to position
the cursor under the letter you want to select. The
4/YES
key
advances the cursor to the left, and the
6/NO
key moves it to the right.
Note: The UP and DOWN arrow keys ( 8 and 2 keys of the numeric
keypad) serve the same purpose, UP= cursor direction right and DOWN =
cursor direction left. Only the 4/YES and 6/NO keys are referenced in
this portion of the manual text.
Note: For software versions 3.08d and keypads with corresponding
alphabet letters only: Press the keypad letter that corresponds to the
home or visitor team name.
To scroll through the letters more easily, press and hold
either key. After about a second the cursor will begin a
rapid succession through the LCD top line characters.
Lift your finger to stop the cursor at the desired letter.
This quick scroll feature can also be used to alternate
LCD screens, which contain the remaining letters of the
alphabet, some punctuation, numbers, space and font indicator. To view the two
additional screens shown, press and hold either the
4
or
6
keys and wait for
the cursor to move beyond either end of the top line of the LCD. As the cursor
moves off the end of each screen the top line changes to the next screen in
sequence.
ABCDEFGHIJKLMNOP
ENTER HOME T.N.
QRSTUVWXYZ&.,’”-
ENTER HOME T.N.
0123456789 NF
ENTER HOME T.N.
