Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
Fig.10
Thread a wheel washer (15 over the end
of the axle and insert a locking pin (16) into
the axles end hole to lock wheel in place.
Place the wheel covers (4) onto the wheels
and press fit into place.
Slide the two handle fixings (19) over the
handle section (12).
Slide the two shafts of the handle (12) over
the handle mounting sections moulded into
the spray bottle (5.1).
Turn the two handle fixings (19) clockwise to
secure the handle in place.
Position the lance holder (13) onto the handle
(12), locating it with the hole in the shaft.
Insert the suction tubing of the hose (10) into
the spray bottle through the hose inlet (5.2).
Screw the compression fitting to secure the
hose in place.
Fig.9
9
7
Screw the lance (7) onto the trigger
assembly (9).
15
16
16
15
4
19
12
5.1
12
19
13
12
10
5.2
