background image

www.faithfulltools.com

Safety Precautions

Always

 use 240V AC charging adapter indoors in a dry location only. 

Exposure to damp or wet conditions could cause electrocution or damage to adapter.

Always

 plug the adapter directly into a 240V outlet in a suitable location.

Do not

 use the charger in the vicinity of flammable liquids or materials.

Do not

 use the charging adapter in combination with any extension cord, electrical 

generators, or step-up transformers.

Do not

 operate the unit until it is completely free of moisture. If the adaptor becomes 

submerged in water, discontinue use immediately and contact your local Faithfull retailer 

for a replacement charger unit.

Do not

 store charging adapter where temperatures may exceed 122°F (50°C).

Store

 in a dry location and do not allow the charging adapter to come in contact with 

water, rain or snow. If the charging adapter comes into contact with water, place in a dry 

location at room temperature, on a soft absorbent towel and allow to dry thoroughly. 

Use only the AC charging adapter supplied with the light. Do not attempt to charge the 

light with an adapter that is not compatible as this could result in a fire, 

damage to the light or personal injury. 
The battery charge indicator will flash when battery is becoming low on charge. 
To prevent overheating do not charge for more than 9 hours.

FAITHFULL TOOLS

Phoenix House,

3 White Lodge Business Estate, Hall Road, 

Norwich, Norfolk, NR4 6DG, United Kingdom

E-mail: enquiries@faithfulltools.com

Maintenance and Storage

All batteries including Li ion require regular maintenance charges, if they are to be 
stored for a prolonged period without use. A maintenance charge protects the battery 
from over discharging which can cause the battery to shut down and helps to prolong 
its working life and ensure the product is always ready for use. 
If a battery is to be left unused for any period of time it should ideally be stored at 
a charge capacity of approximately 40 to 50% to help ensure a long working life. 
If in doubt, keep the battery at a higher charge in a cool place. The worst situation 
is keeping a fully charged battery at elevated temperatures. 

Summary of Contents for FPP SLLED20TB









Reviews: