FAITHTECH
FTB9000 USER MANUAL
26
3.2.Local/Remote operation mode
The device provides two operation modes: local operation and remote operation. In
the local operation mode, the user mainly operates through the keyboard and knob of the
front panel, and checks the device status through the LCD screen. In remote operation
mode, users perform Settings and operations mainly through the communication interface
and programming commands provided by the device.
Local operation mode
After the device is powered on, the default mode is local operation. In the local
operation mode, the user operates the device through the front panel keyboard. The LCD
screen provides the user with the display functions such as parameter viewing,
measurement display and status indication.
Some parameters can be set only in local mode, including:
system language
Serial port baud rate and parity mode
Keyboard sound
IPaddress and subnet mask
Communication protocol selection
Remote operation mode
To enter remote operation mode, use the correct communication cable to connect the
PC to the device. Communication configuration parameters must be consistent with the
control device Settings. After receiving the programming command, the device
automatically enters the remote operation mode from the local control mode.
In remote control mode, the device can only be controlled by programming
commands. To return to local operation mode, press the
key.
3.3.Menu configuration :
3.3.1.Menu setting :
press
，
Enter the menu Settings interface, select the "Settings"
