FAITHTECH
FTB9000 USER MANUAL
47
8. set“edit steps”
，
press
button to confirm
，
The edit focus automatically moves
to the next item, "voltage";
9. set“voltage”
，
press
button to confirm
，
The edit focus automatically moves
to the next item, "source current";
10. set“source current”
，
press
button to confirm
，
The edit focus automatically
moves to the next item, "source power";
11. set“source powe”
，
press
button to confirm
，
The edit focus automatically
moves to the next item, "load currentr";
；
12. set“load current”
，
press
button to confirm
，
The edit focus automatically
moves to the next item, "load power";
；
13. set“load power”
，
press
button to confirm
，
The edit focus automatically
moves to the next item, "Single-step delay";
；
14. set“Single-step delay”
，
press
button to confirm
，
The edit focus
automatically moves to the next item, "edit steps;
，
And add 1 to the edit step
；
15. Repeat step 7 to 13, until all the steps of programming is complete;
16. press
button
，
Save the sequence file you just edited
；
17. press
button
，
Exit the sequence file editing screen
。
Note: Editing sequence files is not allowed while the device is on.
