Operation
13
Insert the mains plug into the socket. „12:00 AM“
flashes on the display and a signal tone sounds. The
device switches to standby. Press the „BREW / AUTO
OFF“ button to start the brewing process without
presetting. To put the device back into standby mode,
press the „BREW / AUTO OFF“ button again.
In standby mode, press and hold the mute button
for one second, the mute indicator lights up and the
sound is switched off. To reactivate, press the button
again for one second.
To set the time, press the „HR“ + „MIN“ buttons simul-
taneously for 2 seconds. Display shows „12:00 AM“.
Set the time:
The time is shown by AM and PM. Press the „HR“
button and the display increases by one hour. Press
„MIN“ and the display is increased by one minute. Hol-
ding down the hour or minute buttons increases the
time values faster. Wait until the digits stop flashing or
press „BREW / AUTO OFF“; the set time is saved and
displayed.
Press and hold the „BREW / AUTO OFF“ button for
three seconds to set the duration of the keep-warm
function. The „AUTO OFF“ display starts at 0:30 (min),
increases by pressing the „MIN“ button by 30 minutes
each and pressing the „HR“ button by one hour. The
max. keep-warm time is 4 hours.
To confirm, press the „BREW / AUTO OFF“ button
again or wait until the display stops flashing and swit-
ches back to standby mode. Now press the „BREW
/ AUTO OFF“ button again, the keep-warm function
switches on after a few seconds with a signal tone
until the time you have set has expired.
BREW / AUTO OFF
(keep-warm function)
Mute
Switch on/off
Brew coffee
Set the time
