Fakir HERBA, Instruction Manual

11

and the iron is switched off.

13.Turn off the main switch.
14.When the appliance gets cool

completely, store it in a safe place.

*  When the Re-fill indication light glows

on, the boiler will be empty. If you want
re-fill the boiler. Please turn off the
appliance and let it complete cooling
down.

VERTICAL STEAMING

This function provides steam to remove
wrinkles on delicate garments in
hanging position, hanging curtains or
other hanging fabric.

NOTE:

1.  Do not apply steam on any clothes or

fabrics that are being worn by human
or pets. Temperature of steam is very
high.

2.  Maintain a distance of a few centimeters

from delicate fabric (Synthetics, silk,
velvet, etc.), otherwise the fabric could
be damaged.

DRY IRONING

1.  Unwind and straighten the power cord

and supply cord.

2.  Fill the boiler with tap water. (See How

to fill water).

3.  Connect the appliance to a suitable

mains supply outlet.

4.  Turn on the power switch.
5.  Turn off the boiler switch.
6.  Turn the Temperature Dial on the iron

in clockwise direction, select dot-1,
dot-2 or dot-3 according to the
recommendation of garment label.

7.  Pilot Light goes off when the required

temperature for the iron unit is reached.

8. The appliance is ready for use.
9.  Turn the Temperature Dial on the iron

unit in anti-clockwise direction to “Min”
and the iron is switched off.

10.Turn off the power switch.
11.Disconnect the power cord from mains

supply outlet.

12.When the appliance gets cool

completely, store it in a safe place.

SPRAYING

This function can be used any time and
is not affect any setting.

1. Remove the spray button as per fig 4
2. Fill the water tank as per fig 5
3. Replace the water tank in its place.
4. Aim the nozzle to the garment.
5.  Press the Spray Button.

NOTE:
It may be necessary to press the
spray button a few times to start this
function.