Kapitel L
24
Before use
The hold-away carrying handle and the four castors make it easy to move the dehumidifier
to the room that is to be dehumidified.
Unimpeded air circulation is necessary for perfect operation, i.e. there must be at least 50 cm
of free space all around the appliance.
Two ways to drain off the condensed water:
Draining into the tank
With this standard function the condensed water is automatically collected in the tank. A flo-
at switch in the tank turns on the "Full Tank" indicator as soon as the water reaches maxi-
mum level in the tank.
Remove the water tank from the front of the appliance and empty. Ensure that the tank is pro-
perly returned. The "Full Tank" indicator is turned off and the dehumidifier is ready to resume
operation.
Drain off to the outside
With this special function the condensed water is conducted by way of a hose directly into a
drain in the floor. This can be of immense advantage when dehumidifying cellars since it is
no longer necessary to regularly empty the full water tank, thereby enabling continuous ope-
ration.
1. Remove the condensed water tank.
2. Remove the angled supports for the drain pipe and store in a safe place.
3. Remove the small prepunched cover at the back of the appliance.
4. Push a draining hose (dia. 14 mm) of suitable length through the resulting opening
and over the drain pipe.
5. Conduct the draining hose to the drain in the floor and ensure that the condensed
water can flow off unimpeded.
Electrical connection
Complete the following checks before the appliance is connected to the mains:
1. The mains voltage must match the voltage specified on the type plate.
2. The mains socket must be correctly earthed and protected by an automatic fuse
(at least 10 A).
3. The power supply plug must be suitable for the given mains socket; the plug must
be exchanged by a skilled authorized person if this is not the case.
The manufacturer cannot be held liable if these accident prevention rules are not observed.
GB
