Cleaning and Maintenance
51
Remove the appliance by pulling the cover towards
you as shown in the figure and install it in
the same way.
Removal and
Installation the Front
Panel
Cleaning of the Front
Panel
Wipe the front panel with a damp cloth. Clean air
inlets with a brush.
Removal and Installa-
tion the Prefilter
Installation of the Prefilter
Hold the prefilter by the retaining clip (Fig. 2 / C)
and lift it up. Remove it from the side flaps. Secure
the filter after cleaning by attaching the tabs shown
previously (Fig. 2) to the connection points.
Cleaning of the Prefilter
Wash under warm or cold water to avoid damaging
the filter.
Do not reinsert the filter until you are sure that it is
completely dry.
The water temperature should not exceed 40 ° C.
Note!
Before conducting any maintenance or cleaning,
switch off and unplug the appliance. If the mains plug
is plugged in, the appliance could accidentally be
switched on, resulting in injuries.
WARNING!