Cleaning and Maintenance
52
Removal and Installation of the Electrostatic Filter
To remove the filter, fold it towards you (B / Figure 2)
and pull it upwards.
To reinstert it, repeat the process in reverse order
(B).(Illustration 1)
Cleaning of the Electrostatic Filter
Wash the filter with lukewarm water and clean it with
a soft brush (e.g. toothbrush). Do not reinsert the filter
until it is completely dry.
Electrostatic Filter
When cleaning the filter, please ensure that the wires
will not be damaged. Broken wires must not remain
in the device. There is a risk of short circuits or fire
due to spark formation. Contact an authorized Fakir
customer service center to have the filter repaired.
WARNING!
If the filter has not been reinserted properly, there is
no electrical connection. Make sure that the filter is
inserted properly.
ATTENTION!