18
MEGAMIX
GB
Before use
Clean the jug, the lid and the feeding lid in water and some detergent. The knife at the
bottom of the bowl is extremely sharp and should be handled with great care. The knife
insert can be removed and washed separately, see more in section “Cleaning and
Maintenance”. Use a damp cloth for cleaning of the motor part.
Use
The blender is used for blending, chopping, pureeing and mixing e.g. milk shakes, baby
food, soups and sauces. Furthermore, you can crush ice for drinks etc.
1-Assemble the blender after cleaning by first putting the glass carafe upside down.
2-Pull the gasket onto the knife holder and position the knife holder with the gasket
and locking ring in the opening at the bottom of the jug.
3-Screw the klocking ring onto the jug until it is completely tight. Check that it is
properly fastened.
4-Put the glass jug on the motor part by inserting the jug into the grooves of the
motor part and turn it clockwise until it engages with a click. Test that the jug is
properly positioned.
5- The motor of the mixer runs the knife blades at high speed in order to ensure a
thorough mixing. Consequently, it is important that the blender is always placed
on an even and dry surface before it is switched on.
6-Fill the jug with the ingredients to be mixed and turn the speed selector to ON. Select
the function by pressing any function button; alternatively you can select the speed by
means of the speed selector. Turn back the speed selector to “OFF” and check the
texture after a few seconds. Continue mixing if necessary.
Make sure that the speed selector is at position
“OFF”’ and apply the plug to a wall outlet.
NOTICE!
That you cannot activate the appliance if the jug is
not positioned correctly on the motor part.
NOTE!
To avoid overfilling the jug, the amount must not
exceed 1.5 litre. Use the measurement scale on the
jug as a guide. Put the lid and the feeding lid on the
jug before you switch on the blender.
NOTE!
Summary of Contents for MEGAMIX
Page 2: ......
