28
USAGE
EN
• When you dissembled the meat grinder cutter
housing, you must press the release button for cutter
housing.
• Insert the pieces of meat in the feed tube piece by
piece using the pusher; never push the meat with the
finger or any other utensil.
CAUTION!
Assembling and fitting the
attachment;
• Insert the worm shaft into the cutter housing, the plastic
end first. Place the cutter unit onto the worm shaft. (The
cutting edges should be at the front.) Place the fine
grinding disc or coarse grinding disc (depending on the
consistency you prefer) onto the warm shaft. (Make sure
the notch of the grinding disc fit onto the projections of the
mincer head.) Turn the screw ring in the direction of the
arrow on the cutter hosing until it is properly fastened.
• Take off the removable cover for meat grinder from the
appliance.
• Place the meat grinder cutter housing to the power outlet
for the meat grinder.
• By using the release button for cutter housing, turn the
cutter housing of the meat grinder and lock it to the
appliance.
• And finally, place the food tray and pusher.
