10
Assembly and Use
1. Place Pulp collector on top of the Body.
2. Fit the filter basket
to the motor drive
coupling and push
down until it into
place.
Ensure the Filter
Basket is fitted
securely
inside the Juice Collector.
3. Place the Juicer Cover over the Juice
Collector.
4. Raise the Safety Locking Arm up and locate
into the two grooves on either side of the
Juice Cover. The Safety Locking Arm should
now be in a vertical position and locked
into place on top of the Juice Cover.
5. Slide the Food Pusher down the Feed Chute
by aligning the groove in the Food Pusher
with the small protrusion on the inside of
the top of the Feed Tube.
6. Place the Pulp Container into position by
tilting slightly.
7. Place the juice jug provided under the Juice
outlet on the right hand side of the Juicer.
The lid can be placed on to avoid any
splatter.
8. Cut the food into small pieces to fit the feed
tube.
9. Switch on and push down with the pusher.
Use speed 1(low speed) for softer food;
speed 2(high speed) for harder food.
Some very hard foods may make your juicer
slow down or stop. If this happens switch
off and unblock the filter.
Switch off and clear the pulp collector
regularly during use.
Always unplug after use!
Dissasembly of the juicer
Reverse the assembly procedure to take
the juicer apart.
SPEED SELECTOR TABLE
Apples High
Apricots (stone removed)
Low
Beetroot High
Blueberries Low
Broccoli Low
Brussels sprouts
High
Cabbage Low
Carrots High
Cauliflower Low
Fennel High
Pineapple (peeled)
High
Melons Low
Plums (stone removed)
Low
Pears
High for hard or Low for soft
Peaches (stone removed)
Low
Celery High
Grapes (seedless)
Low
Cucumber Low
Kiwi fruit
Low
Raspberries Low
Mangoes Low
Tomatoes Low
Oranges (peeled)
High or Low
Watermelon Low
Nectarines (stone removed)
Low
Summary of Contents for Novo
Page 1: ...Novo Juicer Instruction Manual Kat Meyve Presi Kullanma K lavuzu ...
Page 2: ......
Page 7: ...7 ...
Page 12: ...12 ...