Assembly
32
• Loosen the rear guard lock in counterclockwise
direction
• Install the rear guard onto the motor front and
tighten the rear guard lock in clockwise direction.
Make sure the rear guard handle is located at
12 o’clock position.
• Install the blade onto the motor shaft and then
fasten the blade screw cap in counterclockwise
direction.
• Fit in the front guard coupled with the rear guard
and ensure that the locking point of the ring screw
remains at 6 o’clock position.
• Ensure the edges of the front guard and rear
guard have been fitted in the ring screw and fas
-
ten the locking with a screwdriver.
• Install the upper fan onto the adjustable rod and
fasten the floor fixing screw (A). The installation is
completed.
• To adjust the height you may loosen the rod
fixing ring nut (B) and adjust the upper fan to your
desired height level and tighten the rod fixing ring
again.
A
B
Summary of Contents for premium EJV 2019
Page 19: ...19 Notizen ...
Page 21: ...User manual Pedestal fan trend VC 35 S ...
Page 39: ...Notes 39 ...