VC 20 S
EN
18
• Fit the base feet (18) into the feet connector (19) and fix them
with the screws.
• Mount the fan's body on the telescope pole (14) and fix it on the
pole with the fixing screw.
• The grills can be assemble and disassembled easily without
tool. Attach the front grill (2) to back grill (7), ensure that the
icon of the arrow on the front clamping ring point to the locker
on the top of the back clamping ring, and then rotate the front
clamping ring clockwise to secure it. Pull the little pole (8) on
the back clamping ring and rotate the front clamping ring
counterclockwise to disassemble it.
• Check the correct rotation of the blades (5).
Assembly
WARNING!
Prior to assembly, make sure that the main plug is
unplugged. If the main plug is plugged in, the appliance
could accidentally be switched on, resulting injuries.
ATTENTION!
IF the fan blade is blocked, switch off the cooling fan
immediatly and disconnect it from the power supply.
Eliminate the blockage before operating the cooling fan
again.
ATTENTION!
Do not place the appliance directly next to any heat
sources and avoid exposure to direct sunlight. Heat may
cause damage to the cooling fan.
Summary of Contents for prestige VC 20 S
