13
USING THE PET PATROL ROTATING
BRUSH HEAD
WARNING!
Do not touch the motorised brush head
while it is rotating as this could cause
personal injury.
1 To connect the rotating brush head, remove
the cleaner from the wall mounting charging
base.
2 Ensure that the cleaner is switched Off.
3 Push the brush head firmly into the air intake.
See figures 7 and
8. Ensure that the two pins on the brush head
are correctly located in the two sockets on
the air intake.
4 To remove the brush head pull it firmly out
of the air intake.
The rotating brush head is designed for
cleaning short pile carpets
and rugs. It should not be used for cleaning
long pile carpets.
NOTE:
Picking up cotton, hair and other threads
may clog the brush head
by twisting around the brush head spindle.
If this happens remove
the brush head from the cleaner and remove
the thread from the
spindle.
FITTING THE ATTACHMENTS
The crevice tool and upholstery brush are
fitted by pushing them directly into the air
intake. See figure 9. Both of these
attachments may be stored on the charging
base when the unit is not in use. See
figure 10.
7
8
9
10
Pin
Socket
Air intake
Crevice tool
Upholstery Brush
