27
EN
2. When the speed shows “0”, if the user forgets to turn off the power switch, the LED will
turn off after 5 minutes and the machine automatically switches to standby mode.
3. Once you rotate the button clockwise, the speed decreases to 1 (8-0), and when you
rotate the button counter-clockwise, the speed decreases to 1 (8-0). When you turn the
control knob clockwise each time, speed level will increase one stage, and when you turn
the control knob in the opposite direction, the speed will decrease one stage. There are 8
speed stages in total.
4. If you just want to see the operating time, turn the control knob and hold it for 3 seconds.
The speed will not change and the operating time will appear on the LED display.
5. When you press the lift latch (7) while the appliance is running, the body motor body will
lift up and appliance will stop working. And LED display will show 0. (Figure A) When you
lower the motor body with the help of the lift latch, the clock will be back to normal (Picture
B) but the speed must also be adjusted again.
Use of Mixing Bowl
Use of Mixing Bowl
1. Place the mixing bowl on the support leg and turn the bowl
counterclockwise until it locks in place.
(Figure 1)
Summary of Contents for RETROPLEX
Page 2: ...Deutsch 3 English 19 Türkçe 33 Русский 47 العربية 63 ...
Page 18: ...NOT NOTES ...
Page 62: ...NOT NOTES ...
Page 75: ...NOT NOTES ...
