3/8
Important information
Read the instructions below carefully before proceeding to the device operation in order
to ensure its proper functioning!
Please carefully read the instructions below before installing the device to avoid electric
shock, laceration, etc.
While installing the blackout blind it is essential to comply with the following rules:
● After unpacking, check blackout blind elements for any signs of mechanical damage.
● Installation should be performed by a qualified individual following manufacturer's instructions.
● Before connecting the blackout blind, make sure that the power supply voltage corresponds
with that provided on the data plate.
● Connect the blackout blind (two-core cable – 1 2V DC) and verify its correct functioning by
performing one full working cycle with the use of manual operating button.
● Plastic containers used for packing should be kept out of children's reach as they may be a
potential source of hazard.
● The blackout blind should be used for its intended purpose in agreement with its design.
FAKRO Company shall not be held responsible for any consequences resulting from improper
blackout blind use.
● Any activities relating to cleaning, adjustment or disassembly of the blackout blind should be
preceded with its disconnection from the mains.
● The blackout blind should not be cleaned using any solvent substances or open stream of
water (do not immerse in water).
● Any blackout blind repairs should be carried out by the manufacturer's authorised service.
●The blackout blind is for internal use only.
