2. Description
ARZ Z-Wave roller shutters are only for external installation with Fakro roof windows. They are compatible
with Fakro wireless remote controls or other remote controls marked with the Z-Wave logo produced by other companies.
roller shutters are equipped with a two-way module of radio communication. Z-Wave uses 869 MHz radio waves.
The ARZ Z-Wave roller shutter has three extremes:
–
maximum extension (encoder maximum position)
–
completely rolled up (encoder minimum position)
–
current limiting protecting roller shutter against damage and user against accidental injury resulting from the
contact with moving elements of roller shutter.
In order to use the appliance, it is essential to install it in accordance with the figure manual attached to its package.
Programming should be done with any of the remote controls available from Fakro or any remote controls equipped with
the Z-Wave logo produced by other companies.
Figure 1
shows a general view of the ARZ Z-Wave roller shutter with a
description of the buttons and indicators. In the ARZ Z-Wave roller shutter the controlling module is located under the
right-side body cover - see
Figure 1.
02.03.18 NC817-GB 3/7 ©2018, FAKRO
Figure 1: ARZ Z-Wave roller shutter button description.
1. Led network status
2. Programming button P
3. LED motor status
4. Manual control button
2
1
3
4
