8. Technical parameters
Technical parameters
Power voltage
15V DC
Rated current
1,4 A
Speed
23 r.p.m
Temperature of usage
(-10
o
C) do (65
o
C)
Supplying cable
2 x 0,75 mm
2
9. Command classes.
10. Manufacturer Specific Report.
11. Description of signals - light-emitting diode (LED)
Motor operating status (see figure no.1)
Z-Wave operating status (see figure no.1)
Singular blink of the
diode
The current received from the motor
is too low.
Continuous
lighting of the
diode
The appliance does not belong to any network -
remove control is impossible. This diode always
appears when the appliance is connecting to a new
motor. It disappears when the appliance is linked
to any network using “INCLUDE” function.
Triple blink of the
diode
The current received from the motor
is too intensive. A calibration of the
roller shutter motor should be
checked. A description of outskirts
regulation is described in point A of
the roller shutter installation.
02.03.18 NC817-GB 6/7 ©2018, FAKRO
0x0085
0x0003
0x0011
Manufacturer Specific Report
Parameter
Value
Manufacturer ID
Product Type ID
Product ID
Command Classes
Role
Support
Control
Command Class Z-Wave+ Info v2
ok
Command Class Basic v1
ok
ok
Command Class Version v2
ok
Command Class Manufacturer Specific v2
ok
Command Class Device Reset Locally v1
ok
Command Class Association v2
ok
Command Class Association Group Info v1
ok
Command Class Powerlevel v1
ok
Command Class Switch Binary v1
ok
Command Class Switch Multilevel v3
ok
ok
Command Class Switch All v1
ok
Commad Class Configuration v1
ok
Command Class Notification v3
ok
Command Class Node Naming v1
ok
