!
CAUTION!
Risk of product damage!
7. General recommendations for using the awning blind
The awning blind can be operated only if it is completely functio-
nal. Check if for signs of damage (e.g. unusual noise, incomplete
operation range, incorrect setting of end positions). If you notice
any irregularities, stop using it immediately, adjust the blind, and
if the problems continue, contact FAKRO Service
(www.fakro.
com/service)
.
8. Improper use
– Do not move the fabric manually in case of electric awning
blinds.
– Do not load the fabric with additional weights.
9. Risk of injury
Do not move closer body parts to the moving
elements of the awning blind (e.g. lower bar)
during its operation. Before running the blind,
make sure there are no other people nearby.
10. In case of emergency (fire, power failure)
Do not roll down the awning blind in case of fire. In case of fire or
power failure, in order to pave the way to escape, manually push
the fabric by moving the lower bar up towards the cassette.
11. Optimal position of the awning blind
Set the awning blind (lower bar) in the lowest possible position.
This will provide protection against adverse vibrations of the
blind, ensuring its comfortable operation.
12. Service & Maintenance
The awning blind should be maintained regularly at least once
a year. It is suggested to lubricate moving elements of the aw-
ning blind. Use dry Teflon grease. It is recommended to take
advantage of service of the qualified professionals. If repairing
the awning blind on one’s own, disconnect it from the mains,
while in Solar version remove the battery. Use exclusively origi-
nal spare parts. This will ensure trouble-free and long-term ope-
ration of the awning blind.
!
CAUTION!
Risk of product damage!
!
CAUTION!
Risk of product damage!
2
