3
13. Cleaning
Clean the awning blind regularly in accordance with the follo-
wing rules:
– do not lean on the awning blind and its elements;
– remove any foreign objects from the awning blind and its
guides (such as leaves, branches);
– vacuum cleaner or compressed air can be used to remove
dust;
– do not use high pressure washer, aggressive cleaning agents, solvents, alcohol,
petrol, etc.;
– wash using soft sponge and warm water (max 35°C) with soap (or special agents
for PVC), rinse with clean water;
– do not scrub with sharp and abrasive objects;
– some dirt can be removed using clean eraser;
– avoid washing the awning blind in full sun as it may lead to the
formation of stains caused by washing agents;
– once cleaned, leave the awning blind unrolled to dry.
14. Aluminium maintenance
Care of external aluminium profiles consists mainly in washing them at regular in-
tervals and should respect some basic rules depending on environmental conditions
and exposure of the structure. In non-industrial areas, where the environment does
not contain aggressive elements, care should be carried out at least once a year, whi-
le in urban and industrial areas this process requires care at least twice a year.
Care operations:
– It is best to use water with a neutral mild cleaning agents which does not contain
abrasive materials, strong detergents, acids and or alkaline agents, eg. dishwa-
shing or glass cleaner.
– It is allowed to use a chamois leather cloth or washing sponge which is not hard
or rough.
– After cleaning, rinse elements with clean water and dry with a delicate, water-ab-
sorbing cloth or paper towel.
– Do not wash surfaces that are or have been recently exposed to high temperatu-
res.
