background image

 

NOTICE OF INSTALLATION 

 

1.

 

Before installation, please ensure the area is clean to avoid suction 
of the remaining bits of broken wood and dust. 

2.

 

It cannot share the same air ventilation tube with other appliance 
such as gas tube, warmer tube, and hot wind tube. 

3.

 

The bending of ventilation tube should be

 120

°

, parallel or 

above the start point and should be connected to the external wall. 

4.

 

After installation, make sure that the extractor is level to avoid 
grease collection at one end. 

     

 

 

 
 

 

 

SAFETY WARNING 

 

 

Never let children operate the cooker hood. 

 

The cooker hood is for home use only. It is not suitable for 
barbecues, Roast shop and other commercial purposes. 

 

The installation must be completed by a qualified and competent 
fitter. 

 

The cooker hood and its filter mesh should be cleaned regularly in 
order to keep it in good working order. 

 

Before cleaning, switch the power off at the main supply. 

 

Clean the cooker hood according to the instruction manual and keep 
the cooker hood from the danger of burning. 

 

If the supply cord is damaged, it must be replaced by the 
manufacturer, its service agent or similarly qualified persons in order 
to avoid a hazard. 

 

This appliance can be used by children aged from 8 years and above 
and persons with reduced physical, sensory or mental capabilities or 
lack of experience and knowledge if they have been given 

Summary of Contents for FAL-70-ICGW














Reviews: