background image

 

supervision or instruction concerning use of the appliance in a safe 
way and understand the hazards involved. Children shall not play 
with the appliance. Cleaning and user maintenance shall not be made 
by children without supervision 

 

The instructions shall state the substance  of  the  following:                          
– there shall be adequate ventilation of the room when the range 
hood is used at the same time as appliances burning gas or other 
fuels (not applicable to appliances that only discharge the air back 
into the room);   

  – the details concerning the method and frequency  of  cleaning;            

– there is a fire risk if cleaning is not carried out in accordance with 
the instructions;                                                                 

 

 

 

–do  not flam under the range hood;  

 

 

 

                     

– CAUTION: Accessible parts may become hot when used with 
cooking appliances.                                               

– The air must not be discharged into a flue that is used for exhausting 

fumes from appliances burning gas or other fuels (not applicable to 
appliances that only discharge the air back into the room);                          
– the minimum distance between the supporting surface for the 
cooking vessels on the hob and the lowest part of the range hood. 
(When the range hood is located above a gas appliance, this distance 
shall be at least 65 cm.  

  – regulations concerning the discharge of air have to be fulfilled.  

 

The installation instructions for range hoods with accessible metallic 
enclosures of class II construction shall include details that indicate 
the location and maximum permitted lengths for any fixing or 
mounting screw or other fixing device that penetrates into the range 
hood to attach an accessory such as a facia or duct fitting. 

 

Where fixing or mounting screws, or other fixing devices are used, 
that penetrate into the range hood with an accessible metallic 
enclosure of class II construction, to attach an accessory, the 
instructions shall indicate the required location of these screws or 
fixing devices and include the substance of the following warning. 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for FAL-70-ICGW














Reviews: