9
FIXING THE HOB DOWN INTO PLACE
Once the seal has been fitted to the underside of the hob place the hob in the cut out of the
countertop and push it down firmly so that it is resting firmly in place.
Secure the hob in position by using the brackets supplied. Screw one end of the bracket
into the pre-drilled holes on the underside of the hob. The other end of the bracket should
be located underneath the worktop to secure the hob into position.
THE GAS CONNECTION
The qualified LPGas certified installer will make the gas connection as per the regulations.
THE ELECTRICAL CONNECTION
We recommend that the electrical connection be carried out by a qualified electrician.
The wires are coloured in accordance with the following code: Green and Yellow = Earth,
Blue = Neutral, Brown = Live.
LPGAS TO NATURAL GAS CONVERSION
This conversion must only be carried out by a qualified person (LPGas certified installer).
Instructions to replace the gas jets:
1.
Disconnect the appliance from the gas and electrical supplies.
2.
Remove burner components and pan supports.
3.
Remove injectors with a socket spanner and replace with the corresponding jets
