GPS-RECEIVER JP7-T
VERSION 1.02
6.8.4 General purpose input/output
Several I/O’s (GPIO0, GPIO1, GPIO3, GPIO5, GPIO6, GPIO7, GPIO10,
GPIO13, GPIO14, GPIO15, please refer to the tables 4, 5, 6) of the CPU are
connected to the hardware interface connector of the JP7-T family. They are
reserved for customer specific applications.
For example:
For realization a SPI-Bus
−
−
For realization an Antenna-indication.
These pins are not supported by the current GPS firmware.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 33