G
ETTING
S
TARTED
WITH
MAMBO2-B6 EVALKIT
V
ERSION
1.0.3
2 - Charging the battery
Before using the MAMBO2-B6 device you will need to charge the internal battery even if
it may be
shipped from the factory pre-charged. Because it may has been some time in transit and storage before
reaching you, i
t is recommended to charge the device while turned off for approx. 4-5 hours
before the
first use
.
Thereafter, open the
SIM card/Charger cover
on the bottom of the device by pulling down the cover
with your fingernail. There are a mini-USB port and SIM Card interface.
1. Unpack the
USB to Mini-USB retractable cable
and plug one end of this cable with Mini-USU
connector into the 5V Mini-USB connector of the device.
2. Unpack the
AC/DC Adapter USB
from the box and plug the other end (A-type plug) of the
USB
to Mini-USB retractable cable
into the USB jack connector of the
AC/DC Adapter USB
and
finally plug this adapter into an EU socket outlet (to access a US or UK socket outlets, or car's
cigarette lighter use the corresponding
US
or
UK
adaptor
, or
USB car charger
).
➢
The status LED on the right side of the display lights green when charging is started
and turns off when charging is completed,
➢
It is recommended to fully discharge the battery before recharging,
➢
Charging time varies according to the ambient temperature and the status of
battery.
Figure 2:
Accessories for charging the internal battery
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 11 of 24