Navi-xs User’s Guide
Version 1.01
5.1.3 Navigation with NAVI-XS Bluetooth™ GPS Receiver
As soon as you have installed and configured the Falcom NAVI-XS on your mobile
equipment (Pocked PCs), and the unit has already got a valid GPS fix, the inserting
of navigation is anymore in the way. You have just to run the installed GPS Mapping
software. The Bluetooth™ connection for the installed GPS Mapping software must
be set to the correct COM port (please refer to the user documentation of the
installed GPS Mapping software for instructions). Determine which COM port number
your Bluetooth™ device uses for serial COM port connections (in our example is
COM 7). The FALCOM NAVI-XS communicates to a Bluetooth™ serial port with
following settings:
up to 115200 bps, 8 Data Bits, NONE parity, 1 Stop Bit
.
Depending
on the device you use for Bluetooth™ connectivity, you may or may not need to
modify the COM port setting. If necessary, refer to the user documentation of your
Bluetooth™ device. In order to navigate to your destination, please, refer to the user
documentation of installed GPS Mapping software for instructions. There you will find
the methods for setting the destination and following the navigation instructions to
travel to your destination.
We wish you much fun and have a good trip using FALCOM NAVI-XS.
!!!
Please remember that:
Safety to traffic has always priority! Please use the FALCOM NAVI-XS only in
such a way that you always keep control of your vehicle in all traffic conditions.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 27
