SAMBA 55/56
VERSION 1.03
Figure 41:
Message of registering and logging
onto
the GPRS network
The modem is now connected to the GPRS network. Click
OK
button.
Connection to the internet is completed, so the user can start by
clicking the installed internet software.
Figure 42:
Message of GPRS connection.
Right-click its icon on the taskbar (if present) or in
the Network
Connection
folder to check the status of this connection. To
disconnect the connection click the
Disconnect
Popup menu.
Figure 43:
Popup menu of Dial-up connection.
Now the user can start the installed web browser, see section
7.3 Basis
Operation
Followings are examples of some AT-commands. Please refer to the AT
Command manual for a full description.
The AT Command manual is available on the Falcom’s Website
www.falcom.de/download/
NOTE:
Issue
AT+CMEE=1
to have extended error code (
+CNE ERROR
)
his confidentia
Description
AT Commands
Modem responce
Comments
Network
i
i
AT+CREG?
CREG=<mode>,1
Modem registered to the network
T
l document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 41