SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
27
The Outer Burners
Replace the smaller rings on the
outer burners. The very small ring is
for the right hand front burner.
Screw in the hexagon headed venturis but to make
fitting the other burners easier do not fully tighten yet.
an outer burner
When all the burner bases and venturis have been fitted
tighten the venturi nuts.
Reassemble burner heads, making sure they are
reassembled in the correct way on the burner bodies.
base of cook top burner
bottom of burner head
Refit the pan supports.
Reassemble in reverse order.
Stick on label
Stick the appropriate label on to the data badge to
indicate the gas the appliance is now set for.
Pressure Testing
Connect the appliance to the gas supply.
Check the appliance is gas sound.
The gas pressure can be measured at the pressure test
point on the gas inlet. Turn and light one of the hotplate
burners.
Check operation of all the burners.
