Powering the Falcon
10
Falcon
®
4400 Series with Windows
®
CE
Figure 4. Installing the Battery Pack
2. Turn the battery door latches to unlock the battery door. Remove the
door.
3. Insert the battery pack with the pull tab on the outside and the bat-
tery contacts aligned with the matching contacts inside the battery
compartment. The battery pack has a keying feature on one side to
prevent incorrect installation (refer to Figure
4
).
4. Replace the battery door by inserting the bottom tab into the slot. If
the battery pack is installed incorrectly, the door will not seat properly.
5. Rotate the battery door latches on the battery compartment cover
towards the base of the unit.
6. On the 441X, replace the handstrap hook on the strap stud at the base
of the unit.
B
a
ttery Door
Cover Pl
a
te (
u
nit m
a
y h
a
ve H
a
ndle here in
s
te
a
d)
F
a
lcon
B
a
ttery Door L
a
tche
s
Unhook/hook
S
tr
a
p A
s
Needed
B
a
ttery
Pl
as
tic P
u
ll T
ab
S
tr
a
p
S
t
u
d
s
