Page 11
enter the original password after press "OK", otherwise the DVR will keep staying in the
changing password status, and the remote control will not work.
New password
：
Enter the new password
Operating Way:
Enter the menu, press“
、
”to select the options ,then press“
”to enter the
modification mode
，
adjust the number by pressing“
,
,
,
”
，
press“
”to
save after adjustment
。
Press”
”key to exit after all settings done.
PTZ settings: Adjust and control the camera with external PTZ device.(NOT OFFERED ON
THIS UNIT)
Protocols: default PELCO-D, support PELCO-D.PELCO-
Bit rate: under RS485 port: 2400bps,4800bps,9600bps,38400bps,57600bps
Channel-Address: Channel one-Device address
Channe2-Address: Channel two-Device address
Channe3-Address: Channel three-Device address
Channe4-Address: Channel four-Device address
System Info:
Display DVR hardware code number
，
software version information( only view,
couldn’t be changed)
；
Reset the Factory Settings
