8
English
ArtNo.281-0150 - Oven Divider
Base heat
This function uses the base element only. It will crisp
up your pizza or quiche base or finish off cooking
the base of a pastry case on a lower rack. It is also
a gentle heat, good for slow cooking of casseroles in the
middle of the oven or for plate warming.
The Browning and Base heat functions are useful additions
to your oven, giving you flexibility to finish off items to
perfection. With use, you will soon realize how these
functions can combine to extend your cooking skills.
Energy Saving Feature
The oven has a divider feature
(Fig.2-8)
. When this is in place
only one half of the oven is heated and only the right-hand
side elements are used. This saves energy and is ideal for
cooking most foods. When using the divider, condensation
may appear in the left-hand oven – this is normal.
For very large loads, or large dishes for special occasions then
the divider can be removed. This brings into use the elements
on the left-hand side as well as those on the right when a
function is selected.
All oven functions are available in full and divided forms and
shelves are provided for use in both forms.
WARNING!
Take great care when removing the divider NOT to
scratch the inner glass door surface. Scratches in the
glass can cause stress and may cause the door to fail.
Removing the Divider
Make sure the cooker is cool before attempting to
remove the divider.
Fully open the door and remove the oven shelves. When
removing the divider, tilt it slightly upwards and grip the
underside to prevent the metal base making contact with the
door glass (
Fig.2-9
and
Fig.2-10
).
We recommend that you place a tea towel or similar on the
door glass before removing the divider. This should prevent
the door inner from scratching.
DO NOT place or slide metallic objects, including cookware,
on the door glass as this may cause scratching and
subsequent failure to occur.
ArtNo.061-0005 - 90 induction - 900S MF symbols
WARNING!
Take great care when removing the divider NOT to
scratch the inner glass door surface. Scratches in the
glass can cause stress and may cause the door to fail.
ArtNo.062-0005 - Removing the divider (wrong)
Fig.2-9
ArtNo.062-0004 - Removing the divider (right)
Fig.2-10
Fig.2-8
Summary of Contents for 900S Dual Fuel
Page 28: ...26...
Page 29: ...ArtNo 000 0003 CE logo ArtNo 000 0001 Aga address block...
