INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
21
Checking the Parts:
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker
but are
available at most builders’ merchants.
•
Gas pressure tester/manometer.
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10.
Allen keys
11.
Screws for fitting stability bracket
12.
13 mm spanner (or socket wrench)
3 pan supports
Splashback
ArtNo.000-0001 90 Pan supports
ArtNo.421-0002 - Splashback
Griddle
Grill pan & trivet
ArtNo.330-0002 - Grill pan w handle
2 flat shelves
Handyrack
ArtNo.324-0003 Handyrack
Roasting tin
Tall oven shelves and shelf
supports
ArtNo.324-0004 Roasting tin
ArtNo.000-0010 Tall oven shelves
Handles (Classic only)
Plinth
ArtNo.210-0014 - Classic handles
Summary of Contents for Classic 90 Gas
Page 1: ...Classic 90 Gas USER GUIDE INSTALLATION INSTRUCTIONS...
Page 4: ...ii...
Page 33: ...29 Notes...
Page 34: ...30 Notes...