25
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
7. Installation
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
Safety Requirements and Regulations
n
n
This cooker must be installed in accordance with
the relevant instructions in this booklet, with the
relevant national and local regulations, and with
the local gas and electricity supply companies’
requirements.
n
n
Before installation, make sure that the cooker is
suitable for your gas type and supply voltage. See
the data badge.
n
n
The appliance must be installed in accordance with
the regulations in force and only in a well ventilated
space.
n
n
Read the instructions before installing or using this
appliance.
n
n
In your own interest and that of safety, it is law
that all gas appliances be installed by competent
persons. Failure to install the appliance correctly
could invalidate any warranty or liability claims and
lead to prosecution.
n
n
This appliance can be converted for use on another
gas.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Particular attention shall be given to the
relevant requirements regarding ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
nOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note:
An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
This appliance is supplied set for:
G20 20 mbar
Cat II2H3+
Cat II2E+3+
Cat II2L3B/P
Cat II2E3B/P
Cat II2H3B/P
Cat II2ELL3B/P
This appliance is supplied set for group H natural gas (G20
natural gas at 20 millibar).
A conversion kit for another gas is included with the cooker.
If the appliance is to be converted to another gas we
recommend that this be carried out before installation. See
the instructions that are supplied with the conversion kit.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
ArtNo.050-0011 - Installer information table
Installer’s Name
Appliance Serial Number
Installer’s Telephone Number
Installer’s Company
