WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have finished.
31
Art No 215-0028 - Handrail fascia fixings
ArtNo.210-0009 - Classic
removing the handles
9. Servicing
n
n
BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF THE GAS SUPPLY
n
n
Check the appliance is gas sound after completion
of service. When checking for gas leaks DO NOT use
washing up liquid – this can corrode. Use a product
specifically manufactured for leak detection.
n
n
DO NOT use reconditioned or unauthorised gas
controls.
n
n
Disconnect from the electricity supply before
servicing, particularly before removing any of the
following: control panel, side panels, hotplate tray
or any electrical components or covers.
n
n
Before electrical reconnection, check that the
appliance is electrically safe.
1 Panels & Handrails
1.1 To Remove the Handrail
Remove the plastic blanking plugs
(Fig.9-1)
and remove
the 2 end bracket fixing screws.
1.2 To Remove the Control Panel
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control knobs. Remove the handrail (see
1.1).
Now remove the 2 cross-headed screws hidden behind
the handrail end brackets
(Fig.9-2)
.
Pull off all the control knobs and remove the fixing
screws underneath the control panel.
Lift the control panel and pull forwards, taking care not
to damage or strain the wiring.
1.3 To Remove a Side Panel
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1.2). Pull the cooker
forward. Remove the 4 retaining screws from each
panel (2 at the front and 2 at the rear).
The lower front
retaining screws (one each side) are situated beneath
the lower edge at the front corners of the side panels
Reassemble in reverse order.
Fig.9-2
Fig.9-1
